$2 for 5PCBs - order with coupon code: JLCPCBcom
Any questions about JLCPCB or ordering, pls email support @jlcpcb.com
A 600W boost converter that isn't Ming He but might be Drok.
DC-DC Boost Voltage Converter 6-60V to 6V-90V 600W Step Up Voltage Stablizer X- https://ebay.us/bQnFa1

By Julian

Youtuber, shed dweller, solar charge controller aficionado

18 thoughts on “600w boost converter and 75v buck”
  1. Avataaar/Circle Created with python_avatars R M says:

    These boost converters are falsely advertised! Can never put out 10A! Not even close, only around 3.5A, that's it. a scam.

  2. Avataaar/Circle Created with python_avatars MuyBienFelipe says:

    I have bought a very similar buck/boost converter on banggood for 20€ to power a 54v LED and I was disappointed to see that it really can’t churn out more than 1.1 amp at 50volts. Even with a good (Xbox 360) 200w psu it wouldn’t give me more than 50-55w of power output.

  3. Avataaar/Circle Created with python_avatars Mickey Filmer says:

    Chinese stuff has gone very expensive now.

  4. Avataaar/Circle Created with python_avatars ⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻ says:

    shame its not a buck boost conveter could use a nice 200W+ one for a diy bench psu

  5. Avataaar/Circle Created with python_avatars James Howard says:

    What exactly is the tape you put on the display?

  6. Avataaar/Circle Created with python_avatars Clive Trezona says:

    I am also wanting to run power over 350 meters. So looking forward to your next video where you demonstrate this.

  7. Avataaar/Circle Created with python_avatars Great Projects says:

    thank you

  8. Avataaar/Circle Created with python_avatars Joe Keaveney says:

    Julian, great videos! I was wondering if you could advise. I have a MOSFET which needs ~10V to properly open up, and I was wondering if you could recommend a boost converter that would take around 4-5V input and boost this up to 10V. The input is not constant, so the output needs to follow the input quite well. Any ideas? Cheers and keep up the vides 🙂

  9. Avataaar/Circle Created with python_avatars Mike Moore says:

    I'm glad your picking this project back up. I'm interested on how efficient it is whether its good or bad it is till a neat idea.

  10. Avataaar/Circle Created with python_avatars TYGAMatt says:

    Enjoy your buck/boost vids. Such enthusiasm 😉

  11. Avataaar/Circle Created with python_avatars Master Ivo says:

    I made a radiant half bridge circuit video that I present this weekend. I hope you will like it. It recycles the inductive spike energy.

  12. Avataaar/Circle Created with python_avatars Master Ivo says:

    I love the idea of boosting the voltage for long distance power transport, then stepping it down again.
    I adviced it many times for small power generators in gardens

  13. Avataaar/Circle Created with python_avatars Ted McFadden says:

    Thanks again for the red tape trick! I have a USB charger with a watt meter on my desk here; it was a PITA to read before I strapped some red electrical tape over it. 👍

  14. Avataaar/Circle Created with python_avatars David _1 says:

    But would it charge my laptop ?

  15. Avataaar/Circle Created with python_avatars عبدالله سليمان says:

    If Edison had these converters he probably would have won the AC DC war..

  16. Avataaar/Circle Created with python_avatars njfulwider5 says:

    Love making power supplies from these. I have 2 videos with 2 different models, still working great after 3 years!!👍👍👍

  17. Avataaar/Circle Created with python_avatars ethanpschwartz says:

    "I don't want to blow this stuff up…"
    Aww man.
    "…today."
    Theeere we go.

  18. Avataaar/Circle Created with python_avatars Franko Walker says:

    From the Ming-He Dynasty.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.