What goodies are in today's post?
Qi Wireless Charger PCBA Circuit Board With Coil Charging Pad For Nokia Samsung http://www.ebay.co.uk/itm/Qi-Wireless-Charger-PCBA-Circuit-Board-With-Coil-Charging-Pad-For-Nokia-Samsung-/261510047533
New Qi 5V Wireless Charger Accepter Charging Receiver For Samsung Note 2 BF00 http://www.ebay.co.uk/itm/-/400746453682
ThruNite® TN12 2014 Edition 1050 Lumen S... Reply w/ #AmazonBasket to add this http://www.amazon.co.uk/dp/B00I2H2BQE/ref=cm_sw_r_tw_dp_-iOnub0413D7W via @AmazonUK
2 x ThruNite 18650 3400Mah Li-Ion Rechar... Reply w/ #AmazonBasket to add this http://www.amazon.co.uk/dp/B00H7WXXP8/ref=cm_sw_r_tw_dp_VjOnub0KGH8JC via @AmazonUK
More links for ThruNite TN12:
TN12:
Official Store: http://www.thrunite.com/thrunite-tn12-2014/
Amazon USA: http://www.amazon.com/dp/B00IEWOCP0/
Amazon Canada: http://www.amazon.ca/dp/B00I2H2BQE
Amazon Germany: http://www.amazon.de/dp/B00I2H2BQE
Amazon France: http://www.amazon.fr/dp/B00I2H2BQE/
Amazon Italy: http://www.amazon.it/dp/B00IFWUT1A

By Julian

Youtuber, shed dweller, solar charge controller aficionado

13 thoughts on “Postbag #22: qi wireless charging stuff, thrunite tn12 torch”
  1. Avataaar/Circle Created with python_avatars liney118 says:

    the black thing is ferrite , it's used to focus the magnetic field, also used on chokes and small transformers.

  2. Avataaar/Circle Created with python_avatars A V says:

    How did you just try to charge the same device you were filming with …. SMH!

  3. Avataaar/Circle Created with python_avatars Ann Elisabeth says:

    Please get a tripod

  4. Avataaar/Circle Created with python_avatars ingui TV says:

    That "plastic" is a ferrite pad

  5. Avataaar/Circle Created with python_avatars proffski says:

    Base is ferrite.

  6. Avataaar/Circle Created with python_avatars stonent says:

    Qi chargers are suitable for charging people named Stephen Fry and that's Quite Interesting.

  7. Avataaar/Circle Created with python_avatars Hola! Jimmy O. says:

    the newer fast wireless chargers actualy nigoteate back and forth to ramp up the voltage on the pad until the phone is chargeing at a fast rate. idk if there are modual hacker friendly versions yet. i also wonder if you can use a small steel coin in the center to act like a transformer core and improve efficany/ range and power delivery

  8. Avataaar/Circle Created with python_avatars Gediminas Jurgaitis says:

    hi guys, these Qi chargers are compatible with phones what has already inbuilt wireless charging receiver? or anyway I have to use that sticker/receiver?

  9. Avataaar/Circle Created with python_avatars Mike Lemon says:

    How did you measure battery voltage and percentage there?

  10. Avataaar/Circle Created with python_avatars James Holbrook says:

    is it just me or is 90min and 1.5 hours the same

  11. Avataaar/Circle Created with python_avatars CarmenBonkalot says:

    Hey Julian, love the videos. I also have one of these QI chargers, I brought it as a consumer device in a case, not as a naked circuit. One day it stopped working, and it had two melted points. When I opened it I noticed that surface components Q4 and Q9 overhead and exploded to the point of melting the case. Just a word of warning as these particular circuits are pretty cheap

  12. Avataaar/Circle Created with python_avatars Jacob Crosby says:

    Inductive charging, based on my experience, could be considered directional…

  13. Avataaar/Circle Created with python_avatars Adrian Tech says:

    To check brightness, why don't you use the sensor on the screen side of a phone that measures in lux.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.