First play with the iSDT T8 battery charger which combines high power with small size.
iSDT T8 on banggood.com
http://bit.ly/2eTGR0T

By Julian

Youtuber, shed dweller, solar charge controller aficionado

17 thoughts on “First look: isdt t8 battery charger battgo”
  1. Avataaar/Circle Created with python_avatars Rick Worthington says:

    Will this monitor temperature as well?

  2. Avataaar/Circle Created with python_avatars Happy FPV says:

    Can you use any adapter you want? This looks like an interesting charger ๐Ÿ™‚

  3. Avataaar/Circle Created with python_avatars THE THOUGHT MASTER says:

    The safe maximum should be 4.18v. The optimal should be 3.84v. First charge should be maximum then after should be optimal.

  4. Avataaar/Circle Created with python_avatars lemon tea says:

    So did you charge your bicycle battery with this charger? If yes, how did it cope with the task?

  5. Avataaar/Circle Created with python_avatars Ron Tan says:

    Are you using a VHS Handycam to record? Your content is amazing, but the light balance is horrendous to say the least.

  6. Avataaar/Circle Created with python_avatars Ronnie Pirtle Jr says:

    It looks like the resting voltage is trying to drop in the batteries so the charger is sending a microvolt back out to bring it back up.

  7. Avataaar/Circle Created with python_avatars Ronnie Pirtle Jr says:

    I hear that high pitch noise also all the time! I wonder if it is electronics?

  8. Avataaar/Circle Created with python_avatars Eric Jackson says:

    Hi Julian, Do you know if you can set parameters in this charger, and then save them for future charging/Discharging?

  9. Avataaar/Circle Created with python_avatars Eric Jackson says:

    I have to say that the cable on the XT60 that you used on that lipo seems VERY thin! could be dangerous!

  10. Avataaar/Circle Created with python_avatars Honest Insincerity 2 says:

    Awesome video buddy. Gave me exactly all the info I was looking for when trying to decide between this guy and the icharger X6. Thank you!

  11. Avataaar/Circle Created with python_avatars JAMES T. says:

    Are the charge and discharge voltages adjustable? And can it balance when charging starts?

  12. Avataaar/Circle Created with python_avatars JAMES T. says:

    I need one of these like for reals! So I can charge my 7s bank from my lead acid Bank! Graet review!

  13. Avataaar/Circle Created with python_avatars 3dmixer says:

    Can I charge a 130A lithium ion leisure battery from alternator via this charger?

  14. Avataaar/Circle Created with python_avatars nl1cat says:

    So it seems to do bottom-balance too ?

  15. Avataaar/Circle Created with python_avatars Arek Kaลบmierowski says:

    Great vid. No need to check the temp of balancing wires, they don't really get stressed until the end of charging. But great review anyway thanks a lot. Planning to buy this thing.

  16. Avataaar/Circle Created with python_avatars C MJ says:

    I like the ISDT D2 the best as it has two chargers in one and the power supply is built in so you just plug it into the wall. Not so good if you are in the field, but much better for my purposes.

  17. Avataaar/Circle Created with python_avatars C MJ says:

    Using a battery to charge a battery seems stupid to me, for a lack of a better term. I would connect it to a laptop power brick to charge any of my batteries. They should charge more for it and offer a power brick, I hate chargers that don't come with a power source. Other than that it seems like a good charger.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.