$2 for 5PCBs - order with coupon code: JLCPCBcom
Any questions about JLCPCB or ordering, pls email support @jlcpcb.com
I bought a couple of PCBs that connect to HP server power supplies. They have a ton of connectors, a soft switch (to turn the PSU on) and a LED voltmeter. I also bought three HP server PSUs of different power ratings: 460W, 750W and 1200W.
PCI-E 12V 17x 6Pin Power Supply Breakout Board Adapter for HP Server PSU GPU #XTXINTE https://ebay.us/Xv7Mpg
PCI-E 12V Breakout Board Adapter For HP 750W/1200W/1500W Server Power Supply #Unbranded https://ebay.us/EyOfXO
DPS-1200FB/QB A Power Supply Breakout Board Adapter + 12x 6+2 Pin Cable GPU PCI https://ebay.us/phhCO2
HP ProLiant 750W PSU Power Supply 506821-001 511778-001 506822-101 HSTNS PL18 #hp https://ebay.us/k6NOU8
Genuine HP 1200W Power Supply HSTNS-PL11 438203-001 490594-001 498152-001 #HP https://ebay.us/tJp9C3
HP DL380 DL360 G6 G7 460W Server Power Supply Unit 499250-101 499249-001 #HP https://ebay.us/6nBM9o
Any questions about JLCPCB or ordering, pls email support @jlcpcb.com
I bought a couple of PCBs that connect to HP server power supplies. They have a ton of connectors, a soft switch (to turn the PSU on) and a LED voltmeter. I also bought three HP server PSUs of different power ratings: 460W, 750W and 1200W.
PCI-E 12V 17x 6Pin Power Supply Breakout Board Adapter for HP Server PSU GPU #XTXINTE https://ebay.us/Xv7Mpg
PCI-E 12V Breakout Board Adapter For HP 750W/1200W/1500W Server Power Supply #Unbranded https://ebay.us/EyOfXO
DPS-1200FB/QB A Power Supply Breakout Board Adapter + 12x 6+2 Pin Cable GPU PCI https://ebay.us/phhCO2
HP ProLiant 750W PSU Power Supply 506821-001 511778-001 506822-101 HSTNS PL18 #hp https://ebay.us/k6NOU8
Genuine HP 1200W Power Supply HSTNS-PL11 438203-001 490594-001 498152-001 #HP https://ebay.us/tJp9C3
HP DL380 DL360 G6 G7 460W Server Power Supply Unit 499250-101 499249-001 #HP https://ebay.us/6nBM9o
Thanks for the vid, do you have a video on making these HP PSU's variable output voltage, or at least raise their voltages a little higher?
is there a link to youtube is there a link to the hp 460w dps-00F device model no.,?
i want to make 14.4v modified
What about using the SPDIF and connecting it to the SPDIF on the Graphics card preferably a ASUSTEK EN9500GT to get the audio through the HDMI connection.
Can I connect these HP power supplies in series or in parallel?
Is there any way to quiet them down?
What are the fan dimensions for the HP 1200w and would it be possible to replace the stock fan with a noctua one!?
Thanks in advance.
I have (4) 1200w ones I got from work for free in trying to sum all 4 together.
Question: If I need to feed 56V from My EGO battery to this power supply instead of AC 120V what should I change in the power supply?
the fan is running when is no under load on the 1200w power suplly?
pokes the inside of a 1200w PSU with a metal screwdriver that has no rubber coat
Yikes.
What is the fan size?
Hello, Julian, and many thanks for the video! I'm a "PC guy" and rather new to mining. So after my 5th 850W ATC PSU I decided to start buying those cheaper HP server PSUs. Mine was quiet, as opposed to what I saw/heard on the web, but it heated a lot so I got a good PC fan there and thought that was it.
TODAY it decided to go nuclear and ramped up into Full Vaccuum Cleaner Mode…. It's in the other room where I actually LIVE, so that level of noise is untolerable. Do you have a video showing how to tweak those pots? Anything involving "soldering" is above my paygrade (yes, sort of a flaw in character, but then again I'm a very good art photographer, so …) but tweaking stuff is easy.
Otherwise I'll sell it with a bit of profit as I have more cables and a better 16 output connector, about the same one as you got there.
Thanks!
Do you have the fan pinout for the 750W model? It has a little non-standard Molex PicoBlade connector on it. I have the right connector, but I don't want to trial-and-error the pinout.
Are they louder than stanard atx unit?
How can i modify a PL11 for 13.8 or 14.0v if it s possible?
That weird pcb inductor thing is for active power correction.