1. look atcut 5 gloves similar

   Reply

2. Dear Julian! 👍

   For almost 20 years I drove my Mercedes Benz W140 and W202 with prechamber diesel engines and in-line injection pump with vegetable oil in a 2-tank system!
   But not a single one of the vegetable oil drivers' forums managed to manage his Eberspächer or Webasto parking heater with vegetable oil!
   I'm really looking forward to see if you can handle the Chinese clone! 🤔
   The viscosity of vegetable oil is around ~8 times thicker than diesel, we had to preheat the vegetable oil to about ~80°C with the cooling water heat exchanger or electrically to achieve the viscosity and ignitability of diesel!
   In the case of the CDI diesel engines, the conversion of the vegetable oil did not work, or only sometimes with considerable additional expenditure of technology and costs – a lottery game, it works or not!

   ❗ Another tip from me, build in the diesel line a check valve, you'll spare the diesel pump ❗ A cheap plastic check valve from the aquarium accessories is enough ❗

   Now I drive because of these problems with diesel vehicles (driving bans) to drive downtown, unfortunately, an MB gasoline engine. 😒
   I'm not happy with the petrol engine, a diesel engine is much smoother to drive. 😢😭

   Best regards from Austria ❗

   Reply

3. Now you can Unpack using a knife safely LOL

   Reply

4. "Obviously not with my hand in it." Coward!

   Reply

5. Regarding the cut-proof gloves: Try a pair of scissors. Cuts through them in one slice. Useless crap.

   Plus, marketing them as "metal" is blatant false advertising. Why these auction sites continue to promote such dishonest practices I will never understand.

   Reply

6. Those gloves look ideal for sheet metal work!

   Reply

7. I sure wish you had worn the other glove to protect your fingers while slashing 100 times with the other one, Julian. // Which PCB will you be mounting the fuel filters and shutoff valves on, dude? LOL //

   Reply

8. Maybe the icon means "Fuel shut-ff valve"

   Reply

9. Why am I watching this video ? No idea but it's fun

   Reply

10. A short explanation of the current sensor IC would be nice. I looked at the ebay offerings, no word on the function or any data! But it looks very interesting and some kind of hall sensor – but what is the output and how does it relate to the current. Maybe worth a little video?

    Reply

11. Hi. Quick question please. Where do you download your Data sheet from. Thanks in advance

    Reply

12. Typically such gloves are a woven fiber like Kevlar surrounding a stainless steel wire to further help resist slicing forces. In fact, the wire was visible in the video where you were inspecting the finger tip after your first round of cuts.

    Reply

13. Anti-slash gloves, would you need to take them off first if going for a pee ?

    Reply

14. But is it stab resistant?

    Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.