http://www.banggood.com/Geekcreit-Doit-NodeMcu-Lua-ESP8266-ESP-12E-WIFI-Development-Board-p-985891.html?rmmds=search
http://www.banggood.com/NodeMcu-Lua-WIFI-Internet-Things-Development-Board-Based-ESP8266-CP2102-Wireless-Module-p-1097112.html?rmmds=search
http://www.banggood.com/ESP32-Development-Board-WiFiBluetooth-Ultra-Low-Power-Consumption-Dual-Cores-ESP-32-ESP-32S-Board-p-1109512.html?rmmds=search
http://www.banggood.com/NodeMcu-Lua-WIFI-Internet-Things-Development-Board-Based-ESP8266-CP2102-Wireless-Module-p-1097112.html?rmmds=search
http://www.banggood.com/ESP32-Development-Board-WiFiBluetooth-Ultra-Low-Power-Consumption-Dual-Cores-ESP-32-ESP-32S-Board-p-1109512.html?rmmds=search
Z każdym dniem coraz bliżej do Holandii 💚💚💚Ja się cieszę 😘
The tasks are delegated to 2 ESP32’s which must communicate via Bluetooth. I would enjoy seeing the programming of any of those tasks if your viewers can benefit too. Power supply is a concurrent issue (3.3, 5, and 12) in the lightest package.
Great video! I want to use an ESP 32 for a high altitude balloon event. The mission tasks are read and react to GPS and altimeter modules, energize nichrome wire to burn thru a suspension line, energize a 5V solenoid, and run a 12V muffin fan. Maybe take some pictures, log time v altitude,
Lots of new and exciting things in the world of ESP32S! The new finger computer has arrived in the guise of the M5C with built in sensors and a new systems using hats or plug in modules on the i2c bus. Also a new ESP32S-CAM module includes a complete ESP32 on a smaller board with camera plug and camera module, built in flash if needed, runs from the ESP32 example webcam server example uses a 2mpxl camera and can be installed most anywhere, plug in 5 volts of your choosing and you have a home surveillance camera that is broadcast over your home wifi. There is a lot of other new things that I can't afford but these are a few that I could pick up on my limited budget from banggoods.
how did you read that roroom
32 sucks cuz u have to hold the stupid boot button while uploading, which is a pain
I'm trying to build a led matrix for my room using a 32×32 RGB LED Matrix Panel – 4mm Pitch and for the power, i was planning on using a vbestlife dc dc voltage converter power supply module 12v to 3.3v/5v/12v step down converter module and for the brains of the led matrix, i am gonna be using a esp8266 to be able to change the picture to whatever i like over Wi-Fi
the third time i heard him pronounce l.u.a like a fucking fishing accessory he lost me forever… cant stand that shit
I'm curious. About 13 years ago, we were talking about "sensor motes." Now we seem to have moved away from "sensor motes" and toward "IoT."
Is this a difference in application, Julian, or a reflection of the times? To clarify: all sensor motes are IoT, but not all IoT are sensor motes. But has the phrase "sensor mote" vanished, or is it just used in limited applications?
the second one i bought on ebay and its exactely the same as yours
Hi Julian. I really enjoy your videos, keep them coming!
My esp32 DOIT Dev. V1 arrived some days ago, and I have been playing with it in the Arduino IDE.
I'm curious if you have played with the WiFi on this board yet?
Do you have any documentation/links that may be usefull?
Cheers from Norway
No offence Julian but asking for people to sign up to your patreon after what amounts to an 8 min advert for your sponsors feels a bit off.
I've done some study, and seems like the 32 is so superior its almost impossible to justify studying the 8266. But, maybe I'm crazy ? Also, since there are so many sketches out there for the 8266 maybe that would justify playing with it ?
Was floored when I realized I hadn't SUBSCRIBED ! turns out I had subscribed to your "reviews" but not your main system. Not sure if it made it impossible to respond to my questions ?
How are you going about studying for these things? I recently picked up an esp8266 and have no idea where to begin and it's just been sitting on my shelf