Sponsored by JLCPCB ($2 for 10 Boards): https://jlcpcb.com
Putting the first components on my new PWM5 'gumstick' printed circuit boards.
For firmware, schematic and PCB layout, see my PWM5 resources post on Patreon: https://www.patreon.com/posts/pwm5-gumstick-18480181
Putting the first components on my new PWM5 'gumstick' printed circuit boards.
For firmware, schematic and PCB layout, see my PWM5 resources post on Patreon: https://www.patreon.com/posts/pwm5-gumstick-18480181
Why there is no resistor at the base of Q2?
Hello!
I found your project very interesting, let me ask more, how much is your circuit charging battery?
Hey just wanted you to know that on a another channel called strange parts…. They do a factory tour of JLC pcb
good
The product placement is becoming contentious, Julian. It seems that things are not quite as they claim to be with that company's adverts.
Julian, Where do you get your SMD components?
all good stuff…but man…can you waffle on with irrelavent babble
Try paste solder which is actually made for oven soldering but works very well with a fine tipped iron. Just put little dabs on the pads, place the component and while pressing it down with a tweezer tip, touch the leg with the iron tip.
Why have Youtube put a 'Includes paid promotion' overlay on this? Is this some sort of new scheme to further ruin their and their users' ad revenue?
hmmmm 5 components!
will you be selling these again ?
RS hasn't been Radiospares since 1971 :O
This really shows how painless SMD hand soldering can be with a good board and the correct kit.
Really enjoy your solar projects, can I ask do you still use you grid tie inverter and how do you find it, as thinking wether to get one.
Hi Julian,
I’d happily 3d print you a case for the gumstick, ping me back if you’re interested.